- This topic has 1 reply, 2 voices, and was last updated 16 years, 7 months ago by
slipstick.
slipstick.-
Posts
-
edward
I’m starting to design my first 2 stage rocket – 83mm Hybrid to 83mm Hybrid. I’m going to use 98mm tubing for the airframe and hope to just use 48″ lengths. I was seeking opinions on my staging/coupler connection. Right now it is simply a machined piece of aluminum that acts as a coupler/retainer for the motor.
See drawing at:
http://www.alphahybrids.com/tcparachute/2Stage.pdf
Edward
slipstick
Ed, it looks right you have about 1-1/2 diameters of insertion. What’s your strategy on how to light the sustainer? I know nothing about hybrids so maybe I’m an idiot for asking.
Here’s the drawing of my 2 stage “the Twins”.
http://www.telerover.com/rockets/MS/G3_mods_two-stage_Rev8.pdf
The motor retainer was small enough to fit through a standard coupler which was attached to the booster. You only have 7.5mm difference between the motor and airframe diameters so that is a tight setup.
edward
slipstick
- You must be logged in to reply to this topic.