38mm Phenolic Liner

This topic has 2 replies, 2 voices, and was last updated 17 years, 10 months ago by MikeS.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
November 4, 2007 at 2:21 am #40019
MikeS
Moderator
When I was at Oktoberfest I jammed my liner in my 38mm case. had to
chip it out. Could not use my J350. I just got 48″ of RCS 38mm Phenolic liner material to replace it. I needed about 11.5″ but had to order 48″

If any one is needing any let me know. I will use 11.5″ and set back
12″ for future use. No since someone else having to order 48″ to get
a foot. It was with freight about a $48.00 mistake.

This is liner material for an RMS reload.

The lesson of not reading the instructions was worth the purchase.
Note: Light sanding may be required when installing the liner. 😳
November 4, 2007 at 7:30 am #45648
Conway Stevens
Participant
Mike as just a suggestion be sure to hit several of us up here locally. Especially those of us that do research motors. May have had a spare piece to help a guy out… Just a suggestion buddy..

Conway
November 4, 2007 at 1:16 pm #45649
MikeS
Moderator
great…thanks
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

2019-06-01 MHM DAY 2-3 102

✕

We are Good to Go with our scheduled and approved launch on Saturday April 5th and Sunday April 6th, from the North Site, subject to change – Mostly cloudy and High Winds predicted. Range and waiver should be active by 9AM on Saturday. The Pawnee National Grassland remains fragile and dry, so extra precautions are in order. Please stay on the authorized roads and please don’t park more than 100’ off the road at the flight line.