Aerotech motor question

This topic has 1 reply, 2 voices, and was last updated 15 years, 10 months ago by Jeffrey Joe Hinton.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
November 26, 2009 at 1:32 am #40853
djsroc
Keymaster
I have an old AT 38-480 case that the spec. decal has been lost.

Can one get a new label for it? Would I have to send it back to AT?
Should I even worry about it? Thought I would ask here first and call AT later.
November 26, 2009 at 2:13 am #51756
Jeffrey Joe Hinton
Moderator
I wouldn’t worry about the label – it got in the way on some tight motor tubes anyway. The size hasn’t changed, just the appearance.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

We are Good to Go with our scheduled and approved launch on Saturday April 5th and Sunday April 6th, from the North Site, subject to change – Mostly cloudy and High Winds predicted. Range and waiver should be active by 9AM on Saturday. The Pawnee National Grassland remains fragile and dry, so extra precautions are in order. Please stay on the authorized roads and please don’t park more than 100’ off the road at the flight line.