Conical nose cones

This topic has 1 reply, 1 voice, and was last updated 18 years, 8 months ago by Anonymous.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
January 24, 2007 at 1:08 pm #39787
Mike Bennett
Hi I am looking for 38mm and 76mm conical nose cones to borrow. I am looking to make some molds of 38mm and 76mm conical nose cones in a 5 to 1 ratio or longer. They can be plastic or fiberglass and must not be painted. I would only need them for a couple of weeks to make the molds. Let me know.
January 24, 2007 at 6:37 pm #44051
Anonymous
Hi I am looking for 38mm and 76mm conical nose cones to borrow. I am looking to make some molds of 38mm and 76mm conical nose cones in a 5 to 1 ratio or longer. They can be plastic or fiberglass and must not be painted. I would only need them for a couple of weeks to make the molds. Let me know.

Mike, I have 5:1 38mm unpainted conical cones…. contact me offline. Thx, JW
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

The forum ‘Archives 2006-2010’ is closed to new topics and replies.

2018-04-NorthSite 252

✕

We are Good to Go with our scheduled and approved launch on Saturday April 5th and Sunday April 6th, from the North Site, subject to change – Mostly cloudy and High Winds predicted. Range and waiver should be active by 9AM on Saturday. The Pawnee National Grassland remains fragile and dry, so extra precautions are in order. Please stay on the authorized roads and please don’t park more than 100’ off the road at the flight line.