Forums › NCR Members Area › Swap Meet › Going out of rocketry sale
- This topic has 6 replies, 1 voice, and was last updated 13 years, 4 months ago by
Brian Whorley.
-
AuthorPosts
-
August 18, 2012 at 10:46 pm #41555
Brian Whorley
I have been unemployeed for about 7.5 months , but now back to work…. But, yes you guessed it, I am in need of money. Thought I might post here first. I live in lakewood CO but work now in Greely Co. So… Thought for those things I sell here it could be picked up or dropped off and no shipping.
I have 2 Arts 2 Altimeters
I have 2 Raven Altimeters
I have 1 perfect flight Altimeter
I have 1 Arts GPSI have circular polarity antanneas that can fit in nose cone of 4 inch min diameter rocket nose cone ( Mongoose ) to be used with the GPS as a ground station or in a rocket. It has been sent up on 4 flights and shows that you do not loose connection between the point to point radios. Which means you have connectivity through out the flight.
I have most of the 29 mm motor cases, cessoroni
I have all of the 54 mm motor cases, Aero tech
I have several of the 38 mm casesI have a N5000 motor and motor case cessironi Retail $1750 make an offer
I have a N200 motor case aerotech retail $500 make an offerI have an Ultimate wildman rocket, 98 mm motor tube, 6 inch rocket, fiberglass, allready built, never flown. Only thing I was going to do is put electronics in, rail buttons on, tip to tip ( Which may or may not be needed) and paint. THe build with many pictures and great detail is on rocketry planet:
http://www.rocketryplanet.com/forums/showthread.php?t=7883
Kit was $700 With hardware , G-10 for electronic bays (one in coupler and one in nose cone) probably have $800 just in kit, glue, hardware.
Make an offer
I have a mongoose that has taken 2 flights. 8k on a L7200 and 33K on a N2000
The build is coupled with my sons build of the same rocket. Kit was $799
It has been stripped and repainted. Nothing wrong with it, ready to put electronics, and recover and let fly.
Here is the post of the build:
http://www.rocketryplanet.com/forums/showthread.php?t=3318&page=12
My son and I built ours the same so all of the post really is connected to my mongoose.
Here is a You tube video of pictures during the build, the flight and the data of the flights:
Make an offer
I can provide roc sims files of both the Moongoos min diameter 98 mm rocket and the Ultimate Wildman.
Most likely I will not accept less than 50% retail on anything unless you are buying a large group of the items so don’t bother if your going to suggest less than half.
Call me at 315-486-4511
August 20, 2012 at 1:12 am #56177Brian Whorley
I also have the 38mm and 29 mm avionics bay from Adrian if interested.
August 20, 2012 at 1:17 am #56178Brian Whorley
I miss typed, it is the N5800 motor and case not the N5000
August 20, 2012 at 2:53 am #56179Brian Whorley
I have a 96 inch parachute new never been used – paid $220 – Blue and White Make offer
Have Parachute is a TAC-9C with the 7000lb swivel – paid closer to $300 make an offer
September 7, 2012 at 3:42 am #56180Brian Whorley
I have a 96 inch Fruity Chute parachute new never been used – paid $220 – Blue and White Make offer -works in 4 inch rocket or above 14 to 20 lbs
Have Parachute is a TAC-9C with the 7000lb swivel – paid closer to $300 make an offer Will work in Ultimate Wildman kit – 6 inch- 40 lb to 70 lbs
Have N2000 motor case- areotech
Have the largest 54mm CTI with closure
Have Arts GPS system – have circular polarity antanea- can be used n ground station ro in rocket if 4 inch min diamiter or above. Will connect and will not lose signal at time of appogee like dipole to dipole connections. Tested and works above 100K
Have all sizes of 54 mm motor cases areotech
have a few 38 mm motor cases areotech
Have a waltson tracker with 2 of the long range transmitters.
Call me if interested 315-486-4511
September 7, 2012 at 3:46 am #56181Brian Whorley
also have the CO2 ejection system Rouse Tech – CD-3 normally about $300 make an offer- ejection at high altitutes
September 7, 2012 at 3:54 am #56182Brian Whorley
have a K270, 54 mm motor, aerotech
-
AuthorPosts
- You must be logged in to reply to this topic.
