- This topic has 1 reply, 1 voice, and was last updated 19 years, 1 month ago by
Anonymous.
Anonymous.Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
MikeS
In my instructions for my HL, It calls for:
Make a mark 11″ from the end of the motor mount tube along the
air frame and drill the overflow tube hole using a 3/8″ drill bit making
sure to extend the hole from the outside of the air frame into the
motor mount tube.This is a 54mm motor mount tube. The rocket is Hybrid ready. A longer
motor mount.Is this hole required if I am not going to use Hybrid?
This is a stock build, no modifications.
Anonymous
Hi Mike-
If you are not going to fly hybrids, this hole is not needed…
JW
MikeS
Anonymous
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.