Liner

[MikeSModerator]

Last year a liner got stuck in my 38mm case.

I since got it out and had purchased 3′ of 38mm
liner.

I need to cut a 11.5″ piece.

What is the best tool to use to cut the liner?

1. Razor Blade
2. Pipe cutter
3. Saw
4. Other

Thanks Mike

J350 RMS

[Dreasher]

I used a razor saw when this happened to me. Then a little 220 or 400 grit sandpaper to clean up the edges. Have you tried contacting AeroTech about them sending out a new precut liner, or is this how you ended up with the longer piece?

Ron

[MikeSModerator]

Correct. 3′ sticks.

[Art HoagParticipant]

Use a hacksaw or a fine tooth saw of some kind and then sand the end square with a block as Ron suggested.

Art

[Anonymous]

One really nice thing about that liner material – it makes a FANTASTIC piston for phenolic or LOC airframe, if pistons are your thing. Doesn’t schtick as easily as coupler material, and it seems to be just a tad smaller than coupler so it glides quite well.

JW

[Author]

Posts