Looking for a 75mm motor casing for my L3 at MHM

This topic has 17 replies, 8 voices, and was last updated 15 years, 8 months ago by Warren B. Musselman.

Viewing 8 posts - 11 through 18 (of 18 total)

Author

Posts
April 25, 2010 at 4:28 am #52006
Warren B. Musselman
Moderator
While we’re at it – I need a CTI 4 grain 98mm case for MHM… preferably before so I can pre-assemble the motor. Anyone?

Warren
April 25, 2010 at 4:31 am #52007
Chris LaPanse
While we’re at it – I need a CTI 4 grain 98mm case for MHM… preferably before so I can pre-assemble the motor. Anyone?

Warren

I have one, but I’ll be using it (for my L3) Saturday morning. You can borrow it when I’m done with it, but that won’t allow for the pre-assembly.
April 26, 2010 at 3:54 am #52008
Rocketwhiz
Participant
While we’re at it – I need a CTI 4 grain 98mm case for MHM… preferably before so I can pre-assemble the motor. Anyone?

Warren

I have that too. Same rules. I’ll bring it 5-1 launch.

Man, I better start writing this down 🙄
April 26, 2010 at 7:23 pm #52009
Warren B. Musselman
Moderator
Unfortunately, it looks like I won’t make the 5/1 launch – gotta be in Grand Junction for a consulting gig. I’m definitely bummed as I have a 4″ bird all prepped and ready to go on an L1300. Ah well, such is life. But if anyone wants to loan me the 4 grain CTI case I’ll be happy to drive to wherever to pick it up. Obviously, the usual rules apply – I damage it, I buy you a brand new one.

Warren
April 26, 2010 at 10:58 pm #52010
Rocketwhiz
Participant
Unfortunately, it looks like I won’t make the 5/1 launch – gotta be in Grand Junction for a consulting gig. I’m definitely bummed as I have a 4″ bird all prepped and ready to go on an L1300. Ah well, such is life. But if anyone wants to loan me the 4 grain CTI case I’ll be happy to drive to wherever to pick it up. Obviously, the usual rules apply – I damage it, I buy you a brand new one.

Warren

You can pick it up at my wife’s shop Hwy 36 & Pecos. I can have her take it tomorrow. She’s usually there from 7:30 – 5:00. Let me know.
April 27, 2010 at 3:46 am #52011
Jeffrey Joe Hinton
Moderator
Bring it to the launch and I’ll pick it up for Warren. I’ll be seeing him before he’ll get to your wife’s shop. We’re supposed to be crossing paths like on Tuesday or Wednesday the 4th or 5th.
April 27, 2010 at 4:33 am #52012
Rocketwhiz
Participant
No problem.
April 28, 2010 at 5:24 pm #52013
Warren B. Musselman
Moderator
Many thanks gentlemen…

Warren
Author

Posts

Viewing 8 posts - 11 through 18 (of 18 total)

You must be logged in to reply to this topic.

2019-06-01 MHM DAY 2-3 888

2019-06-01 MHM DAY 2-3 077

566thSMS_Site6_BriggsdaleColorado_Google

✕

We are Good to Go with our scheduled and approved launch on Saturday April 5th and Sunday April 6th, from the North Site, subject to change – Mostly cloudy and High Winds predicted. Range and waiver should be active by 9AM on Saturday. The Pawnee National Grassland remains fragile and dry, so extra precautions are in order. Please stay on the authorized roads and please don’t park more than 100’ off the road at the flight line.