Forums › Archives › Archives 2016 › Mile High Mayhem
- This topic has 14 replies, 6 voices, and was last updated 9 years, 2 months ago by
scott cowherd.
-
AuthorPosts
-
May 25, 2016 at 10:47 pm #57024
Jack Matthews
ModeratorSounds like a plan… per my conventional e-mail reply, I'm available to tow both ways. I plan to set up my camp trailer on Thursday and will retrieve the rocket trailer on Thursday PM. Should have a passel o' people around to get set up early on Friday. Sun comes up @ 0529, BTW. Rise and shine.
Jack
May 26, 2016 at 8:26 pm #57025edward
ModeratorI have a hybrid that will require the window. It sims to just over 32,000'. I'll take any day I can get for it.
Edward
May 27, 2016 at 2:15 pm #57026Jeffrey Joe Hinton
ModeratorEdward,
We'll look at the weather and winds aloft carefully. Thanks for the “Head's Up”.
May 29, 2016 at 5:29 am #57027edward
ModeratorYou are welcome Joe.
Also, if anyone else is going to fly a hybrid let me know – that way I can have all the equipment there.
Edward
May 29, 2016 at 12:35 pm #57028MikeS
ModeratorMr. Jack Matt. I will run and PU the trailer Thursday afternoon. I will set-up about
a third of the launch. (pads , line poles and such) Leave the tables and electronics for Friday
morning. Please let me know if there has been any major changes in set-up.
I will wait till you show to leave (if your not there) You can take your time getting
there. I am off all week. Plus…. 1/3 of the reason I got this van was to haul the launch
trailer. This would be a good time for it.
If thats OK…. Let me know.
PSSSSS. I am guessing the trailer is in the normal PU place.
PSS again. Will there be Port-A Pots for the weekend?.
And. What is the FEE for the weekend at registration?
thanks MIke S.
If not I will be there thursday afternoon.
June 1, 2016 at 5:04 pm #57029edward
ModeratorI know the 1010 Red Pad will be there, is that the longest 1010 rail that the club has?
I would use the swingset but that uses doorknobs for rail buttons.
For my hybrid I'll probably be moving the pad I'm using out further along the road to gain some more distance.
It is an N hybrid and I'd like some additional standoff.
Edward
June 3, 2016 at 3:29 am #57030MikeS
ModeratorWe are 80% set up. A lot of people started showing at about 3:00 pm. had great help
setting up.
Notes:
1. Construction between Pierce and Nunn will slow you down about 30 minutes.
2. The road from county road 122 to the launch site have been graded and topped with a
white gravel type stuff. Well done.
3. Pawnee is beautiful. Grass not as tall as expected but growing well. Green and lush
with the dry tops from last year showing. Fire hazord way down but still possable.
4. Eight mid and high power pads up and two away pads. One closer to the road as
requested. Eight low power pads as well.
5. All that is left to do is place the boxes, and put fence posts in for the ropes.
6. Friday shows to be a little breezey, saturday and sunday is to be near
perfect.
Come out and have some fun.
June 6, 2016 at 12:22 pm #57031MikeS
ModeratorA wonderful weekend of launches.
Thank to all that orginized the launch. All went smooth. Had lots of help setting up and tearing down. It was a snap. 🙂
I will post what pictures I have. Had my cameras all jacked up,
did not find out till Sunday. 931 MB of picktures trash and what was left were not a lot better.
Very few launch pictures came out till sunday.
June 6, 2016 at 1:26 pm #57032MikeS
ModeratorHere are the pictures. Out of five or six hundred. Here is what was useable.
June 6, 2016 at 9:18 pm #57033Steve Jensen
ParticipantThanks Mike! Fun seeing you after so long too.
-
AuthorPosts
- You must be logged in to reply to this topic.