Need a 98mm case to borrow

This topic has 1 reply, 2 voices, and was last updated 18 years ago by Art Hoag.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
September 4, 2007 at 3:28 am #39962
Warren B. Musselman
Moderator
I need a 98mm case – either AT or AMW or other to size check a 98mm motor mount and retainer before mixing epoxy. It shall be returned post-haste as soon as the fit check is done. Size doesn’t matter so long as it is 98mm. In the process of building the L3 project…

Warren
September 4, 2007 at 4:54 am #45246
Art Hoag
Participant
You might want to ask big Joe. He lives in your neck of the woods so it would make it easier on you to get a casing. He is off Tuesday but works the rest of the week.

Art
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

The forum ‘Archives 2006-2010’ is closed to new topics and replies.

We are Good to Go with our scheduled and approved launch on Saturday April 5th and Sunday April 6th, from the North Site, subject to change – Mostly cloudy and High Winds predicted. Range and waiver should be active by 9AM on Saturday. The Pawnee National Grassland remains fragile and dry, so extra precautions are in order. Please stay on the authorized roads and please don’t park more than 100’ off the road at the flight line.