North Coast Rocketry 3” Nose Cone

[Art HoagParticipant]

I have a North Coast Rocketry 3” nose cone that I have no use for. If you are familiar with the old North Coast stuff then you will know that their 3” is not the same size as the standard 3”. I have kept it just because I am sure there is someone out there who has a North Coast rocket with their oddball 3” tubing and no nose cone. If you are that person or know of that person, it is free! Even if you own a 3” North Coast rocket and it is fine, you should claim this nose cone, and then you will have an extra nose cone (guys can always use extra parts).

Thanks,
Art

arthoag@gmail.com

[new2hprParticipant]

Art,

What’s the ID/OD of the North Coast 3″ tubing? I know I had to kludge the diameters for the mailing tube used in the HPSD. I might want the cone.

Thanks,
Ken

[Art HoagParticipant]

I don’t have any airframe, just the nose cone. If memory serves me, the North Coast airframe is about the same size as standard 3″ LOC coupler tubing.

Art

[new2hprParticipant]

OK, so it’s probably sized by OD. That goes well with mailing tubes. I’ll try it and see.

Ken

[Author]

Posts