- This topic has 14 replies, 5 voices, and was last updated 17 years, 8 months ago by
Warren B. Musselman.
Warren B. Musselman.-
Posts
-
Anonymous
Well, the good folks at Smalley were unable to help… the OD of the rings is too great.
Now I must try to grind one down enough (but not too much). Hmmm….
Warren B. Musselman
John, the split rings used by Skyripper hybrids are somewhat less than half the exposure of the AMW rings – also a bit lighter and thinner. I don’t know where they get theirs but that would be where I’d look.
Warren
edward
The Skyripper rings come from Smalley.com. They are a custom run that Todd does. He doesn’t have them for 75mm as there isn’t a 75mm line yet. I know there are a few floating around in the club from the 54mm Skyripper line.
Edward
Anonymous
FWIW, Smalley would do a run for this use…. but it was going to be $350 to set up and then they’d do a bunch of them for nothing. The cost is all in the setup. One would cost as many as a hundred.
I’m going to go by a machine shop tomorrow and see if they can grind the standard one, or otherwise offer some suggestions.
JW
Warren B. Musselman
If it’s any help, I’d buy a few if you end up having to have them made.
Warren
Anonymous
Warren B. Musselman
edward- You must be logged in to reply to this topic.